Gi en rating på Google
Du vil motta en e-post så snart produktet er på lager!
En ukjent feil har oppstått. Prøve igjen
1/24 SCX24 2019 Jeep Wrangler V2 JLU CRC 4WD Rock Crawler Brushed RTR
I en skala på 1/24 gjør Axial SCX24 Jeep Wrangler JLU CRC 4WD RTR enhver RC-entusiast til å iscenesette et crawlereventyr når som helst og hvor som helst, innendørs eller ute. Det detaljerte karosseriet og den sterke ytelsen kombinerer for massiv moro i mikrostørrelse.
Bilen leveres helt komplett og klar til å kjøre, den er utrustet med kraftige lys foran og hele karosseriet kan tiltes bakover etter bare å fjerne en enkelt klips, for enkel tilgang til elektronikken. Store dekk gir tøft utseende med gode klatreegenskaper og bilen leveres med oppladbart LiPo-batteri som gir lang kjøretid.
Jeep Wrangler JLU kommer nå med ny radio, ny regulator, ny bedre lader for batteri.
No matter where you are, the 1/24 scale Axial® SCX24™ Jeep® Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you’re stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside — where its water-resistant electronics are safe from the elements — and set up an exciting trail with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial® SCX24™ Jeep® Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24™ Jeep® Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.
Needed to Complete
What's in the Box?
Approximate Assembly Time: | No assembly required |
Ball Bearings: | Full set |
Batteries: | Dynamite 7.4V 350mAh 30C LiPo, 3C charge rate (1.0A) |
Body: | Axial Jeep JL Hardtop |
Brakes: | Integral with ESC |
Charger: | Included |
Chassis: | Stamped Steel Chassis Rails |
Completion Level: | Ready-To-Run |
Differential: | Worm Gear 16T/4T |
Drivetrain: | 4WD |
Front Track: | 3.9 in (99.5mm) |
Ground Clearance: | 1.06" (27mm) |
Height: | 4.2" (106.5mm) |
Length: | 7.8" (199.5mm) |
Motor Size: | 180 |
Motor Type: | Brushed 180 size, 88 turn |
Outer Diameter: | 2.0 in (51mm) |
Pinion: | 10T |
Radio: | Included |
Rear Track: | 3.9 in (99.5mm) |
Receiver: | Included |
Scale: | 1/24 |
Servos: | AS-1 Micro Steering Servo |
Shock Type: | Coil-Over, Plastic Body, .9 - 1.3" (24 - 33.4mm) |
Speed Control: | Included |
Spur Gear: | 55T |
Suspension: | 3 Link Front and 4 Link Rear |
Tire Tread: | Trail Grappler |
Vehicle Type: | Desert Crawler |
Water-Resistant: | Yes |
Wheel Type: | Plastic KMC Machete, black in color |
Wheel Width: | .48" (12.4mm) |
Wheelbase: | 5.2" (132.5mm) |
Width: | 3.9" (99.5mm) |
Axialracing er leverandør og produsent av kvalitets crawlere og scalariktige rc biler, deler og tilbehør
Kommentarer